Difference between revisions of "Workshop"

From Mtc
Jump to navigationJump to search
 
(13 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
===Electrical===
 +
*Run tons of it.
 +
*Any time that you are working with aluminum wire, you must coat all connections with conductive grease such as Ideal brand Noalox. Failure to do so will result in a connection failure due to corrosion, and a hazardous condition which could result in fire or electrical shock.
 +
====220====
 +
*Plasma
 +
*Welder
 +
*Compressor (outside in soundproof enclosure, possibly sunken or partially sunken?)
 +
*Lathe
 +
*Mill
 +
*Drill Press
 +
 +
===Moto-shed: integrate riding gear storage===
 +
**helmets
 +
**gloves
 +
**jackets/pants
 +
**boots
 +
*Pour concrete drive-way.
 +
**Figure out how to minimize elevation change from driveway to workshop and moto-shed but still deal w/ drainage.
 +
===Compressor and compressed air line===
 +
* Mount it on spring isolation mounts/pads
 +
* It's possible to separate the compressor from the tank, possibly put cooling/drain between the two.
 +
* There are automatic drain mechanisms so you don't have to twist the drain valve every time.
 +
*Put compressor "outside" in an insulated "room" of it's own, possibly sunken or partially so.
 +
*Quincy compressors seem to be pretty good. Seth has one, ask him about it.
 +
*[http://www.garagejournal.com/forum/showthread.php?t=141247&highlight=air+plumbing&page=2 Garage Journal post on compressor and lines]
 +
 +
===Welding/plasma station===
 +
===Materials storage===
 +
**Misc wood
 +
**Sheet metal and plywood
 +
**Misc metal
 +
===Things to ponder===
 +
*Storage:
 +
**maybe redo loft for better access and long stock storage out access doors into driveway/carport area
 +
**Upper cabinets rimming shop up to ceiling w/ LED spot/task lighting underneath.
 +
*Lighting
 +
**LED
 +
**Have some portable task lights w/ magnifiers etc.
 +
**Work ambient lighting from outside.
 +
*Heated floor
 +
**Probably electric w/ concrete/self-leveler over it, possibly stain
 +
*Beer fridge, maybe "outside" or sunken somehow w/ tap(s) in convenient location.
 +
*Sink, probably outside.
 +
*Hidden moto-lift in center?
 +
*[http://www.baldor.com/catalog#category=31 Baldor Grinder]
 +
*Sand blaster.
 +
*Computer station
 +
*Double hinged barn doors w/ "lights".
 +
**Want to be able to use as a regular "door" as well, seems reasonable.
 +
**Double hinged will allow opening w/ tighter clearance in front.
 +
*Would like to extend roof out front for added covered working area
 +
**Elevated cross-members and widely spaced vertical supports at far corners.
 +
**Integrate w/ moto-shed
 +
 +
===Flooring===
 +
====Anti Fatigue Mats====
 +
*Look into what they use at Trader Joe's
 +
*Ask Jarrett what he recommends for gym flooring.
 +
*[http://www.amazon.com/Stanley-Utility-24-Inch-Long-36-Inch/dp/B00EJ9PVFM/ref=sr_1_6?ie=UTF8&qid=1418275851&sr=8-6&keywords=anti+fatigue+mat Stanley Antifatigue Mats] at Amazon, sounds like the tops might not be ultra durable but maybe could layer something on top.
 +
*[http://www.amazon.com/Wilmar-W88989-Diamond-Anti-Fatigue-Interlocking/dp/B000IZ9C9M/ref=sr_1_10?ie=UTF8&qid=1418275851&sr=8-10&keywords=anti+fatigue+mat Wilmar Antifatigue Mats] at Amazon.
 +
*[http://www.amazon.com/CumulusPRO-Commercial-Anti-Fatigue-Comfort-24-inch/dp/B005UA2WO2/ref=sr_1_8?ie=UTF8&qid=1418275851&sr=8-8&keywords=anti+fatigue+mat Cumulus Pro Antifatigue Mats] at Amazon.
 +
*[http://www.grainger.com/category/antifatigue-mats/matting/safety/ecatalog/N-mzl?redirect=MATS&perPage=48&requestedPage=1# Granger Options for antifatigue mats]
 +
===Misc===
 
*[http://www.frets.com/HomeShopTech/hstpages.html HomeShop Tech] Good looking list of shop advice and all sorts of stuff...
 
*[http://www.frets.com/HomeShopTech/hstpages.html HomeShop Tech] Good looking list of shop advice and all sorts of stuff...
 
*[http://www.amazon.com/Schlage-BE365VCAM619-Camelot-Keypad-Deadbolt/dp/B000NJJ1MQ/ref=sr_1_2?ie=UTF8&qid=1403764903&sr=8-2&keywords=schlage+keypad Schlage Keypad] door deadbolt set.
 
*[http://www.amazon.com/Schlage-BE365VCAM619-Camelot-Keypad-Deadbolt/dp/B000NJJ1MQ/ref=sr_1_2?ie=UTF8&qid=1403764903&sr=8-2&keywords=schlage+keypad Schlage Keypad] door deadbolt set.
Line 9: Line 72:
 
*[http://www.amazon.com/s/?ie=UTF8&keywords=kreg+automaxx+bench+clamps&tag=googhydr-20&index=aps&hvadid=27129468243&hvpos=1t1&hvexid=&hvnetw=g&hvrand=2136480651040451155&hvpone=&hvptwo=&hvqmt=b&hvdev=c&ref=pd_sl_5pyf7jce6p_b Kreg Clamps] recommended by Sakurama on GarageJournal.
 
*[http://www.amazon.com/s/?ie=UTF8&keywords=kreg+automaxx+bench+clamps&tag=googhydr-20&index=aps&hvadid=27129468243&hvpos=1t1&hvexid=&hvnetw=g&hvrand=2136480651040451155&hvpone=&hvptwo=&hvqmt=b&hvdev=c&ref=pd_sl_5pyf7jce6p_b Kreg Clamps] recommended by Sakurama on GarageJournal.
 
*[http://www.festoolusa.com/Web_files/Getting_the_most_from_the_VS_600_jointing_system.pdf Festool VS600 Joining system PDF]
 
*[http://www.festoolusa.com/Web_files/Getting_the_most_from_the_VS_600_jointing_system.pdf Festool VS600 Joining system PDF]
 +
===Tools===
 +
*[http://www.monsterballvise.com/orderinfo.htm MonsterBallVise]... [http://www.youtube.com/watch?v=uwv_XjWp1KA Home Made Ball Vise].

Latest revision as of 09:42, 31 January 2016

Electrical

  • Run tons of it.
  • Any time that you are working with aluminum wire, you must coat all connections with conductive grease such as Ideal brand Noalox. Failure to do so will result in a connection failure due to corrosion, and a hazardous condition which could result in fire or electrical shock.

220

  • Plasma
  • Welder
  • Compressor (outside in soundproof enclosure, possibly sunken or partially sunken?)
  • Lathe
  • Mill
  • Drill Press

Moto-shed: integrate riding gear storage

    • helmets
    • gloves
    • jackets/pants
    • boots
  • Pour concrete drive-way.
    • Figure out how to minimize elevation change from driveway to workshop and moto-shed but still deal w/ drainage.

Compressor and compressed air line

  • Mount it on spring isolation mounts/pads
  • It's possible to separate the compressor from the tank, possibly put cooling/drain between the two.
  • There are automatic drain mechanisms so you don't have to twist the drain valve every time.
  • Put compressor "outside" in an insulated "room" of it's own, possibly sunken or partially so.
  • Quincy compressors seem to be pretty good. Seth has one, ask him about it.
  • Garage Journal post on compressor and lines

Welding/plasma station

Materials storage

    • Misc wood
    • Sheet metal and plywood
    • Misc metal

Things to ponder

  • Storage:
    • maybe redo loft for better access and long stock storage out access doors into driveway/carport area
    • Upper cabinets rimming shop up to ceiling w/ LED spot/task lighting underneath.
  • Lighting
    • LED
    • Have some portable task lights w/ magnifiers etc.
    • Work ambient lighting from outside.
  • Heated floor
    • Probably electric w/ concrete/self-leveler over it, possibly stain
  • Beer fridge, maybe "outside" or sunken somehow w/ tap(s) in convenient location.
  • Sink, probably outside.
  • Hidden moto-lift in center?
  • Baldor Grinder
  • Sand blaster.
  • Computer station
  • Double hinged barn doors w/ "lights".
    • Want to be able to use as a regular "door" as well, seems reasonable.
    • Double hinged will allow opening w/ tighter clearance in front.
  • Would like to extend roof out front for added covered working area
    • Elevated cross-members and widely spaced vertical supports at far corners.
    • Integrate w/ moto-shed

Flooring

Anti Fatigue Mats

Misc

Tools

Retrieved from "http://wiki-mtc.eri.ucsb.edu/index.php?title=Workshop&oldid=987"