Difference between revisions of "Welding"
From Mtc
Jump to navigationJump to search| Line 4: | Line 4: | ||
*[http://www.lincolnelectric.com/en-us/education-center/Pages/education-home.aspx Lincoln site on education materials and resources] | *[http://www.lincolnelectric.com/en-us/education-center/Pages/education-home.aspx Lincoln site on education materials and resources] | ||
*[http://weldingweb.com/ WeldingWeb.com] recommended in several places, lots of info. | *[http://weldingweb.com/ WeldingWeb.com] recommended in several places, lots of info. | ||
| + | *[http://weldingweb.com/archive/index.php/t-8746.html Discussion of cutting] w/ plasma, bandsaw, chopsaw, coldsaw... | ||
==MIG== | ==MIG== | ||
Revision as of 07:30, 3 February 2015
General Welding Info...
- ADVRider thread on welding.
- Miller Resources Section, lots of info.
- Lincoln site on education materials and resources
- WeldingWeb.com recommended in several places, lots of info.
- Discussion of cutting w/ plasma, bandsaw, chopsaw, coldsaw...
MIG
- Miller Single Phase MIG unit comparison
- Seems like the Multimatic 200 at $2000 could be one of the better suited MIG setups and it'll do TIG as well. ...tho the Millermatic series will run harder and at a lower MSRP than the Multimatic, but they're only 220.
Plasma Cutter
- HyperTherm65
- Spectrum® 625 X-TREME™ with XT40 Torch $1807 MSRP.
- This is probably the burliest unit that'll still run 110/220, next unit up is 240 only and runs $2785.
Projects
TIG
- Miller Dynasty 200 base msrp of $3900 and full pimp package (951397) runs $6900 msrp. This would probably be plenty machine but you can move up from there to the 280 and 350. Sakurama has the Dynasty 200.
- Miller TIG PDF
- AHP Alpha TIG 200 probably not real reliable but it is cheap and is AC, $750.
