Difference between revisions of "Welding"
From Mtc
Jump to navigationJump to search (Created page with "==General Welding Info...== *[http://advrider.com/forums/showthread.php?t=210053 ADVRider thread on welding.] *[http://www.millerwelds.com/resources/ Miller Resources Section]...") |
(No difference)
|
Revision as of 19:30, 12 December 2014
General Welding Info...
- ADVRider thread on welding.
- Miller Resources Section, lots of info.
- Lincoln site on education materials and resources
- WeldingWeb.com recommended in several places, lots of info.
MIG
- Miller Single Phase MIG unit comparison
- Seems like the Multimatic 200 at $2000 could be one of the better suited MIG setups and it'll do TIG as well. ...tho the Millermatic series will run harder and at a lower MSRP than the Multimatic, but they're only 220.
Plasma Cutter
- Spectrum® 625 X-TREME™ with XT40 Torch $1807 MSRP.
- This is probably the burliest unit that'll still run 110/220, next unit up is 240 only and runs $2785.
TIG
- Miller Dynasty 200 base msrp of $3900 and full pimp package (951397) runs $6900 msrp. This would probably be plenty machine but you can move up from there to the 280 and 350.
