Difference between revisions of "BMW R65"

From Mtc
Jump to navigationJump to search
 
(14 intermediate revisions by the same user not shown)
Line 2: Line 2:
 
*[http://bmwmotorcycletech.info/electricalhints.htm Electrical Hints] at BMW Motorcycle Tech.info.  Very thorough and informative reference to electrical systems.
 
*[http://bmwmotorcycletech.info/electricalhints.htm Electrical Hints] at BMW Motorcycle Tech.info.  Very thorough and informative reference to electrical systems.
 
* [http://revivalcycles.com/ Revival Cycles] Lots of nice/clean/minimal parts and they have a really nice electrical system overhaul package.
 
* [http://revivalcycles.com/ Revival Cycles] Lots of nice/clean/minimal parts and they have a really nice electrical system overhaul package.
 +
* [http://www.youtube.com/watch?v=52HRAhAzrBE Chris Harris youtube vid on removing engine from an AirHead]
 +
* [http://bmwmotorcycletech.info/setvalves.htm Article on valve adjustment and rocker arm endplay]
 +
* [https://www.youtube.com/watch?v=VExx_2kIc9c Chris Harris youtube vid on valve clearance and rocker arm endplay adjustment]
  
−
===Tasks===
+
==Tasks==
 +
201408:
 +
*oil filter (SCP) & 20W50 oil
 +
*joining compound for cylinder/case interface
 +
*black silicon for pushrod rubber bits.
 +
*at the cylinder/head gasket [http://www.gasgacinch.com/gasgacinch_002.htm GaskeaCinch]
 +
*?anything in addition to the valve cover gaskets?
 +
Older:
 
* Check w/ Gene at Moto Loco on powder coat pricing breakout
 
* Check w/ Gene at Moto Loco on powder coat pricing breakout
 
** Guestimate $600-1K for a big pile.
 
** Guestimate $600-1K for a big pile.
 
* Adrian also suggested Shelby at Santa Barbara Industrial Metal Finishing in Goleta, he'd probably be good for non-frame stuff w/out tight tolerances.
 
* Adrian also suggested Shelby at Santa Barbara Industrial Metal Finishing in Goleta, he'd probably be good for non-frame stuff w/out tight tolerances.
 
*[http://www.gastanklining.com/index.html Gas tank cleaning and lining] North Hollywood - $195 + 50% off second tank (for odd HDavidson tanks).
 
*[http://www.gastanklining.com/index.html Gas tank cleaning and lining] North Hollywood - $195 + 50% off second tank (for odd HDavidson tanks).
 +
 +
===Machining===
 +
*flatten heads to mate w/ valve covers
 +
*polish cylinders, heads, valve covers
 +
** Should the stainless pushrod tubes be installed before or after polish?
 +
 +
*Pushrods have slight score marks mid-length, some worse than others.  Huh?
 +
 +
*Replace valve seats [http://www.beemershop.com Here]
 +
 +
===Replacement Parts===
 +
*head gaskets
 +
*O-Rings for cylinder head (4 small at bolts and 2 big on cylinder)
 +
*valve cover seals
 +
*push-rod tube seals
 +
*center stand springs
 +
*rear brake switch
 +
*oil pressure/neutral sender and wire
 +
*fork cartridge update.
 +
**fork seals
 +
*Wheel bearing seals and wheel bearings
 +
 +
 +
====Stainless====
 +
*SS Engine mount bolts
 +
*SS bolt/nut kit
 +
 +
===Related Vids and articles===
 +
*Piston ring compression [http://w6rec.com/duane/bmw/piston/ringtool.htm]
 +
*Pushrod tube seal replacement - Part 1 of 3 (Chris fucking Harris)[https://www.youtube.com/watch?v=A47LiKSYD9o]
 +
*Useful maintenance tips - R80 [http://jhau.maliwi.de/mot/index.htm]
  
 
==Parts==
 
==Parts==
Line 106: Line 147:
 
====Nuts and bolts - Stainless====
 
====Nuts and bolts - Stainless====
 
*[http://www.shawstainless.co.uk Stainless nuts and bolts and parts] Full kit 140 pounds sterling
 
*[http://www.shawstainless.co.uk Stainless nuts and bolts and parts] Full kit 140 pounds sterling
 +
*[https://www.motobins.co.uk/index.php Stainless pushrod tubes and axles (rear)]
 +
*[http://www.motorworks.co.uk/vlive/Home/index.php More kit from England]
 +
*[http://www.benchmarkworks.com SS front axel (Sturgis, MS)]
  
 
===Nice Builds===
 
===Nice Builds===

Latest revision as of 13:43, 8 September 2014

Reference Material

Tasks

201408:

  • oil filter (SCP) & 20W50 oil
  • joining compound for cylinder/case interface
  • black silicon for pushrod rubber bits.
  • at the cylinder/head gasket GaskeaCinch
  • ?anything in addition to the valve cover gaskets?

Older:

  • Check w/ Gene at Moto Loco on powder coat pricing breakout
    • Guestimate $600-1K for a big pile.
  • Adrian also suggested Shelby at Santa Barbara Industrial Metal Finishing in Goleta, he'd probably be good for non-frame stuff w/out tight tolerances.
  • Gas tank cleaning and lining North Hollywood - $195 + 50% off second tank (for odd HDavidson tanks).

Machining

  • flatten heads to mate w/ valve covers
  • polish cylinders, heads, valve covers
    • Should the stainless pushrod tubes be installed before or after polish?
  • Pushrods have slight score marks mid-length, some worse than others. Huh?
  • Replace valve seats Here

Replacement Parts

  • head gaskets
  • O-Rings for cylinder head (4 small at bolts and 2 big on cylinder)
  • valve cover seals
  • push-rod tube seals
  • center stand springs
  • rear brake switch
  • oil pressure/neutral sender and wire
  • fork cartridge update.
    • fork seals
  • Wheel bearing seals and wheel bearings


Stainless

  • SS Engine mount bolts
  • SS bolt/nut kit

Related Vids and articles

  • Piston ring compression [1]
  • Pushrod tube seal replacement - Part 1 of 3 (Chris fucking Harris)[2]
  • Useful maintenance tips - R80 [3]

Parts

Controls

Levers and Perches

Switches

Throttle

Brakes

More Parts

Brakes

Bars

Lights

Speedometer/Tach

Fuel Tank

Gas Cap - Aviation Style Chrome

Electrical

Mufflers

SS 18", 1.5" Diameter R65 is 35mm/1.37" and 17.5" long

Tools

Nuts and bolts - Stainless

Nice Builds

Retrieved from "http://wiki-mtc.eri.ucsb.edu/index.php?title=BMW_R65&oldid=839"