Difference between revisions of "BMW R65"

From Mtc
Jump to navigationJump to search
 
(21 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
===Reference Material===
 
===Reference Material===
 
*[http://bmwmotorcycletech.info/electricalhints.htm Electrical Hints] at BMW Motorcycle Tech.info.  Very thorough and informative reference to electrical systems.
 
*[http://bmwmotorcycletech.info/electricalhints.htm Electrical Hints] at BMW Motorcycle Tech.info.  Very thorough and informative reference to electrical systems.
−
===Tasks===
+
* [http://revivalcycles.com/ Revival Cycles] Lots of nice/clean/minimal parts and they have a really nice electrical system overhaul package.
 +
* [http://www.youtube.com/watch?v=52HRAhAzrBE Chris Harris youtube vid on removing engine from an AirHead]
 +
* [http://bmwmotorcycletech.info/setvalves.htm Article on valve adjustment and rocker arm endplay]
 +
* [https://www.youtube.com/watch?v=VExx_2kIc9c Chris Harris youtube vid on valve clearance and rocker arm endplay adjustment]
 +
 
 +
==Tasks==
 +
201408:
 +
*oil filter (SCP) & 20W50 oil
 +
*joining compound for cylinder/case interface
 +
*black silicon for pushrod rubber bits.
 +
*at the cylinder/head gasket [http://www.gasgacinch.com/gasgacinch_002.htm GaskeaCinch]
 +
*?anything in addition to the valve cover gaskets?
 +
Older:
 
* Check w/ Gene at Moto Loco on powder coat pricing breakout
 
* Check w/ Gene at Moto Loco on powder coat pricing breakout
 
** Guestimate $600-1K for a big pile.
 
** Guestimate $600-1K for a big pile.
−
* Check w/ Channing about using his powder coat gear.
+
* Adrian also suggested Shelby at Santa Barbara Industrial Metal Finishing in Goleta, he'd probably be good for non-frame stuff w/out tight tolerances.
−
** Probably not an option.
+
*[http://www.gastanklining.com/index.html Gas tank cleaning and lining] North Hollywood - $195 + 50% off second tank (for odd HDavidson tanks).
 +
 
 +
===Machining===
 +
*flatten heads to mate w/ valve covers
 +
*polish cylinders, heads, valve covers
 +
** Should the stainless pushrod tubes be installed before or after polish?
 +
 
 +
*Pushrods have slight score marks mid-length, some worse than others.  Huh?
 +
 
 +
*Replace valve seats [http://www.beemershop.com Here]
 +
 
 +
===Replacement Parts===
 +
*head gaskets
 +
*O-Rings for cylinder head (4 small at bolts and 2 big on cylinder)
 +
*valve cover seals
 +
*push-rod tube seals
 +
*center stand springs
 +
*rear brake switch
 +
*oil pressure/neutral sender and wire
 +
*fork cartridge update.
 +
**fork seals
 +
*Wheel bearing seals and wheel bearings
 +
 
 +
 
 +
====Stainless====
 +
*SS Engine mount bolts
 +
*SS bolt/nut kit
  
−
===Parts===
+
===Related Vids and articles===
−
====Bars====
+
*Piston ring compression [http://w6rec.com/duane/bmw/piston/ringtool.htm]
−
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-parts-satin-black-drag-bars-23-12570-sbpc.html Satin Black Drag Bars in 7/8"] $25.
+
*Pushrod tube seal replacement - Part 1 of 3 (Chris fucking Harris)[https://www.youtube.com/watch?v=A47LiKSYD9o]
−
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-handlebars-parts-satin-black-supermoto-bars-23-12571s.html Satin Black Supermoto Bars in 7/8"] $25
+
*Useful maintenance tips - R80 [http://jhau.maliwi.de/mot/index.htm]
−
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-handlebar-parts-black-aluminum-low-superbike-bars-80-0627.html Satin Black Renthal Ultra-Low Superbike bars in 7/8"] $65.
 
−
* [http://www.protaper.com/products/handlebars/ Answer ProTaper Bars]
 
−
** dimensions:
 
−
*** up to 70cm wide total
 
−
*** triple clamp is 20-24cm wide
 
−
*** looking for minimal rise. (20-30mm)
 
  
−
====Lights====
+
==Parts==
−
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-handlebar-parts-black-led-bar-ends-15-1010.html Bar end blinkers] $50 Can we clamp mirrors to them?
 
−
*[http://www.britishracer.com/index.php?main_page=product_info&products_id=1866 Retro LED Blinkers] 61.50 Euro
 
−
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-electronic-lighting-parts-mini-retro-gloss-black-led-bullet-turn-signals-blinkers-ag330-537-blk.html Gloss Balck retro bullet LED turn signals] $130... yikes!
 
−
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-electronic-lighting-parts-mini-retro-scarab-turn-signals-blinkers-26-6216.html LED "Scarab" Turn Signals - (Satin Black & Clear)] $50
 
−
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-electronic-lighting-parts-mini-black-topedo-turn-signals-blinkers-60-1900s.html Mini LED "Torpedo" Turn Signals - (Black & Smoke)] $35
 
−
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-electronic-lighting-parts-mini-black-oval-turn-signals-blinkers-26-6219.html Mini LED Oval Turn Signals - (Black & Clear)] $23
 
−
*[http://store.revivalcycles.com/collections/lighting-1/products/x-arc-signals Smooth and clean LED turn signals] $95/pair
 
  
−
==Controls==
+
===Controls===
  
 
====Levers and Perches====
 
====Levers and Perches====
Line 52: Line 77:
 
*[http://www.rizoma.com/universal/fluid-tanks/en Rizoma]: Brake fluid reservoir really clean/minimal design.  50-80 euros.
 
*[http://www.rizoma.com/universal/fluid-tanks/en Rizoma]: Brake fluid reservoir really clean/minimal design.  50-80 euros.
 
*[http://www.venhillusa.com/Venhill-Custom-Shop/Venhill-Braided-Stainless-Steel-Brake-Line-Custom-Make-Your-Own-Brake-Line-KitOne-Line-with-Stainless-Steel-Fittings-p705.html Another option for stainless braided brake lines.] Check out the "carbon" color.
 
*[http://www.venhillusa.com/Venhill-Custom-Shop/Venhill-Braided-Stainless-Steel-Brake-Line-Custom-Make-Your-Own-Brake-Line-KitOne-Line-with-Stainless-Steel-Fittings-p705.html Another option for stainless braided brake lines.] Check out the "carbon" color.
 +
 +
==More Parts==
 +
 +
====Brakes====
 +
*[http://www.amazon.com/EBC-Brakes-MD606LS-Brake-Rotor/dp/B006B25PE2 Front brake rotor]
 +
====Bars====
 +
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-parts-satin-black-drag-bars-23-12570-sbpc.html Satin Black Drag Bars in 7/8"] $25.
 +
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-handlebars-parts-satin-black-supermoto-bars-23-12571s.html Satin Black Supermoto Bars in 7/8"] $25
 +
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-handlebar-parts-black-aluminum-low-superbike-bars-80-0627.html Satin Black Renthal Ultra-Low Superbike bars in 7/8"] $65.
 +
* [http://www.protaper.com/products/handlebars/ Answer ProTaper Bars]
 +
** dimensions:
 +
*** up to 70cm wide total
 +
*** triple clamp is 20-24cm wide
 +
*** looking for minimal rise. (20-30mm)
 +
 +
====Lights====
 +
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-handlebar-parts-black-led-bar-ends-15-1010.html Bar end blinkers] $50 Can we clamp mirrors to them?
 +
*[http://www.britishracer.com/index.php?main_page=product_info&products_id=1866 Retro LED Blinkers] 61.50 Euro
 +
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-electronic-lighting-parts-mini-retro-gloss-black-led-bullet-turn-signals-blinkers-ag330-537-blk.html Gloss Balck retro bullet LED turn signals] $130... yikes!
 +
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-electronic-lighting-parts-mini-retro-scarab-turn-signals-blinkers-26-6216.html LED "Scarab" Turn Signals - (Satin Black & Clear)] $50
 +
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-electronic-lighting-parts-mini-black-topedo-turn-signals-blinkers-60-1900s.html Mini LED "Torpedo" Turn Signals - (Black & Smoke)] $35
 +
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-electronic-lighting-parts-mini-black-oval-turn-signals-blinkers-26-6219.html Mini LED Oval Turn Signals - (Black & Clear)] $23
 +
*[http://store.revivalcycles.com/collections/lighting-1/products/x-arc-signals Smooth and clean LED turn signals] $95/pair
 +
 +
====Speedometer/Tach====
 +
*[http://bmwmotorcycletech.info/ringgears.htm Speedometer Ratio 3.56/1.318]
 +
*[http://cycleplicity.com/products/373610-baja_designs_19_2853_bk__acewell_2853_black_speedometer.aspx?utm_source=google&utm_medium=cpc&utm_content=373610NOFITMENT&utm_campaign=GSNOFITMENT&adtype=pla&kw=&utm_term=&adpos=1o2&network=g&gclid=CLiLsKfoyboCFcM9QgodOmcAeA Acewell Black]
 +
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-cables-acewell-2853-digital-motorcycle-speedo-speedometer-tach-tachometer-bmw-ace-s11.html Acewell Cable Converter]
 +
*[http://www.trailtech.net/digital-gauges/vapor Vapor Digital] $130
 +
**[http://www.trailtech.net/digital-gauges/accessories/indicator-light-dashboard Dashboard Lights] $55
 +
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-electronic-parts-mini-stainless-steel-black-face-electronic-mph-kph-speedo-speedometer-60-1632.html 2.5" Black face stainless electronic Speedo] $129
 +
**[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-electronic-parts-mini-chrome-electronic-tach-tachometer-49-3374.html "Matching Chrome Electronic Tach] $71 (Brian at Dimecity - closest we can come up with)
 +
*[http://cycleplicity.com/products/373615-baja_designs_19_3962__acewell_3962_black_speedometer_computer.aspx?utm_source=google&utm_medium=cpc&utm_content=373615NOFITMENT&utm_campaign=GSNOFITMENT&adtype=pla&kw=&utm_term=&adpos=1o4&network=g&gclid=CKygwuSNzLoCFWqCQgodYQsAUg Acewell 3692 Rectangular Digital] $240 w/shipping
 +
*[http://www.speedhut.com/gauge/GR258-SPEEDO-01/1/Speedometer-Gauge-120mph-programmable Customizable Guages!!!]
 +
**[http://www.speedhut.com/gauge/GR258-TACH-03/1/Tachometer-Gauge-10K-RPM-mini-Shift-light Tach with billet aluminum black anodized bezel]
 +
***[http://www.speedhut.com/customizer.i?clid=1511060 4" all in one "Legendary" customized]
 +
*[http://www.advrider.com/forums/showthread.php?t=527749 Reference for hooking up Gen light]
 +
 +
====Fuel Tank====
 +
[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-fuel-tank-parts-flush-mount-aviation-style-fuel-gas-cap-gc1903.html Gas Cap - Aviation Style Chrome]
 +
 +
====Electrical====
 +
*[http://www.euromotoelectrics.com/EnDuraLast-II-400-Watt-Charging-System-p/edl400-altkit107.htm  Enduralast charging system upgrade (400 watt)] $300
 +
**[http://www.euromotoelectrics.com/product-p/edl450-altkit.htm Enduralast 450watt upgrade]
 +
***[http://moto.zoic.org/r100gs/generator.html Enduralast 450 Install]
 +
*[http://www.euromotoelectrics.com/EnDuraSpark-Electronic-Ignition-System-BMW-R-70-95-p/edl-boign.htm Ignition system upgrade]
 +
*[http://shoraipower.com/products?action=vehicle&type=175&make=7366&model=7405&year=7405 Shorai Li-PO battery type] LFX21L6-BS12
 +
**Length 5.83"
 +
**Width 3.23"
 +
**Height 5.51"
 +
 +
**[http://www.ebay.com/itm/like/331044254031?lpid=82 Ebay] $189.74
 +
***[http://www.amazon.com/Shorai-Lithium-Kawasaki-Harley-Davidson-LFX21L6-BS12/dp/B008K5NU18/ref=sr_1_1?s=automotive&ie=UTF8&qid=1385527989&sr=1-1&keywords=lfx21l6-bs12]  Amazon $174.95
 +
 +
***[http://www.braillebattery.com/index.php/braille/product_accessory/b14115_b14115c_aluminum_mount_kit1 Braille battery mount kit for ML14C, 5.8x3.4x5.75]
 +
 +
*[http://www.euromotoelectrics.com/category-s/192.htm AGM (Absorbed Glass Matt) batteries] $89
 +
 +
*[http://www.badgertrek.com/motorcycles/TSTLR/lithbat.shtml Build your own Lithium battery pack]
 +
 +
*[http://www.motoelekt.com Alternative to Euromotoelectrics...great knowledge base]
 +
 +
====Mufflers====
 +
[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-exhaust-parts-stainless-steel-reverse-cone-quiet-core-motorcycle-muffler-mc-1500-18-q-ss.html SS 18", 1.5" Diameter] R65 is 35mm/1.37" and 17.5" long
 +
 +
====Tools====
 +
*[http://www.northwoodsairheads.com/Tools.html Specialty (inexpensive) Tools]
 +
 +
====Nuts and bolts - Stainless====
 +
*[http://www.shawstainless.co.uk Stainless nuts and bolts and parts] Full kit 140 pounds sterling
 +
*[https://www.motobins.co.uk/index.php Stainless pushrod tubes and axles (rear)]
 +
*[http://www.motorworks.co.uk/vlive/Home/index.php More kit from England]
 +
*[http://www.benchmarkworks.com SS front axel (Sturgis, MS)]
 +
 +
===Nice Builds===
 +
*[http://www.bikermetric.com/2011/01/cream-motorcycles-cb750-tracker.html Yamaha with metal frame]
 +
**This bike also had some controls drilled into handlebar.
 +
*[http://misterbridges.blogspot.com/search?updated-min=2010-01-01T00:00:00-08:00&updated-max=2011-01-01T00:00:00-08:00&max-results=37 View From The Bridge] Blog, not sure if this is useful but seems kinda interesting.
 +
*[http://cafebeemers.blogspot.de/ CafeBeemers Blog]
 +
*[http://anythingbutstockbeemers.blogspot.de/ AnythingButStockBeemers Blog]

Latest revision as of 13:43, 8 September 2014

Reference Material

Tasks

201408:

  • oil filter (SCP) & 20W50 oil
  • joining compound for cylinder/case interface
  • black silicon for pushrod rubber bits.
  • at the cylinder/head gasket GaskeaCinch
  • ?anything in addition to the valve cover gaskets?

Older:

  • Check w/ Gene at Moto Loco on powder coat pricing breakout
    • Guestimate $600-1K for a big pile.
  • Adrian also suggested Shelby at Santa Barbara Industrial Metal Finishing in Goleta, he'd probably be good for non-frame stuff w/out tight tolerances.
  • Gas tank cleaning and lining North Hollywood - $195 + 50% off second tank (for odd HDavidson tanks).

Machining

  • flatten heads to mate w/ valve covers
  • polish cylinders, heads, valve covers
    • Should the stainless pushrod tubes be installed before or after polish?
  • Pushrods have slight score marks mid-length, some worse than others. Huh?
  • Replace valve seats Here

Replacement Parts

  • head gaskets
  • O-Rings for cylinder head (4 small at bolts and 2 big on cylinder)
  • valve cover seals
  • push-rod tube seals
  • center stand springs
  • rear brake switch
  • oil pressure/neutral sender and wire
  • fork cartridge update.
    • fork seals
  • Wheel bearing seals and wheel bearings


Stainless

  • SS Engine mount bolts
  • SS bolt/nut kit

Related Vids and articles

  • Piston ring compression [1]
  • Pushrod tube seal replacement - Part 1 of 3 (Chris fucking Harris)[2]
  • Useful maintenance tips - R80 [3]

Parts

Controls

Levers and Perches

Switches

Throttle

Brakes

More Parts

Brakes

Bars

Lights

Speedometer/Tach

Fuel Tank

Gas Cap - Aviation Style Chrome

Electrical

Mufflers

SS 18", 1.5" Diameter R65 is 35mm/1.37" and 17.5" long

Tools

Nuts and bolts - Stainless

Nice Builds

Retrieved from "http://wiki-mtc.eri.ucsb.edu/index.php?title=BMW_R65&oldid=839"