Difference between revisions of "BMW R65"

From Mtc
Jump to navigationJump to search
 
(40 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
===Reference Material===
 
===Reference Material===
 
*[http://bmwmotorcycletech.info/electricalhints.htm Electrical Hints] at BMW Motorcycle Tech.info.  Very thorough and informative reference to electrical systems.
 
*[http://bmwmotorcycletech.info/electricalhints.htm Electrical Hints] at BMW Motorcycle Tech.info.  Very thorough and informative reference to electrical systems.
−
===Tasks===
+
* [http://revivalcycles.com/ Revival Cycles] Lots of nice/clean/minimal parts and they have a really nice electrical system overhaul package.
 +
* [http://www.youtube.com/watch?v=52HRAhAzrBE Chris Harris youtube vid on removing engine from an AirHead]
 +
* [http://bmwmotorcycletech.info/setvalves.htm Article on valve adjustment and rocker arm endplay]
 +
* [https://www.youtube.com/watch?v=VExx_2kIc9c Chris Harris youtube vid on valve clearance and rocker arm endplay adjustment]
 +
 
 +
==Tasks==
 +
201408:
 +
*oil filter (SCP) & 20W50 oil
 +
*joining compound for cylinder/case interface
 +
*black silicon for pushrod rubber bits.
 +
*at the cylinder/head gasket [http://www.gasgacinch.com/gasgacinch_002.htm GaskeaCinch]
 +
*?anything in addition to the valve cover gaskets?
 +
Older:
 
* Check w/ Gene at Moto Loco on powder coat pricing breakout
 
* Check w/ Gene at Moto Loco on powder coat pricing breakout
 
** Guestimate $600-1K for a big pile.
 
** Guestimate $600-1K for a big pile.
−
* Check w/ Channing about using his powder coat gear.
+
* Adrian also suggested Shelby at Santa Barbara Industrial Metal Finishing in Goleta, he'd probably be good for non-frame stuff w/out tight tolerances.
−
** Probably not an option.
+
*[http://www.gastanklining.com/index.html Gas tank cleaning and lining] North Hollywood - $195 + 50% off second tank (for odd HDavidson tanks).
 +
 
 +
===Machining===
 +
*flatten heads to mate w/ valve covers
 +
*polish cylinders, heads, valve covers
 +
** Should the stainless pushrod tubes be installed before or after polish?
 +
 
 +
*Pushrods have slight score marks mid-length, some worse than others. Huh?
 +
 
 +
*Replace valve seats [http://www.beemershop.com Here]
 +
 
 +
===Replacement Parts===
 +
*head gaskets
 +
*O-Rings for cylinder head (4 small at bolts and 2 big on cylinder)
 +
*valve cover seals
 +
*push-rod tube seals
 +
*center stand springs
 +
*rear brake switch
 +
*oil pressure/neutral sender and wire
 +
*fork cartridge update.
 +
**fork seals
 +
*Wheel bearing seals and wheel bearings
 +
 
 +
 
 +
====Stainless====
 +
*SS Engine mount bolts
 +
*SS bolt/nut kit
 +
 
 +
===Related Vids and articles===
 +
*Piston ring compression [http://w6rec.com/duane/bmw/piston/ringtool.htm]
 +
*Pushrod tube seal replacement - Part 1 of 3 (Chris fucking Harris)[https://www.youtube.com/watch?v=A47LiKSYD9o]
 +
*Useful maintenance tips - R80 [http://jhau.maliwi.de/mot/index.htm]
 +
 
 +
==Parts==
 +
 
 +
===Controls===
 +
 
 +
====Levers and Perches====
 +
*[http://www.lowbrowcustoms.com/p776/buy/m-c-parts/wheels-tires-amp-brakes/universal/brakes/lcfabrications-universal-brake-fluid-reservoir-brass-amp-aluminum/ Brass & Aluminum brake reservoir]
 +
*[http://www.dimecitycycles.com/vintage-caferacer-cafe-racer-bobber-brat-chopper-custom-motorcycle-brake-parts-black-aluminum-nissin-retro-hydraulic-front-brake-master-cylinder-717-654e.html Nissin Brake lever/master cylinder and brake switch] $189
  
−
===Parts===
+
====Switches====
 +
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-electronic-parts-black-handlebar-mounted-headlight-on-off-starter-switch-12-0203.html Right side "Simple & Clean" On/Off & Starter Switch] $30
 +
*[http://www.bikebandit.com/k-s-compact-motorcycle-multi-switch Left side controls]
 +
** ''1 1/8" Wide''
 +
**High Beam LED
 +
 
 +
====Throttle====
 +
* Two cables is for PushPull mechanisms.  Some controls can serve either single or PushPull.
 +
*[http://www.dimecitycycles.com/vintage-caferacer-cafe-racer-bobber-brat-chopper-custom-motorcycle-handlebar-control-parts-biltwell-whiskey-throttle-black-aluminum-single-cable-wt-alu-78-bk.html Black Aluminum Biltwell "Whiskey" Throttle - (7/8", Single Cable)] $95 looks to mtc like the best quality single.
 +
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-handlebar-parts-chrome-single-cable-aluminum-throttle-assembly-28-0033.html 7/8" Single Cable Throttle Assembly] $16
 +
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-throttle-parts-black-nylon-throttle-assembly-68-2an.html 7/8" Light-weight Nylon Throttle Assembly and Grips - (Gloss Black)] $13
 +
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-throttle-parts-oem-style-satin-black-honda-throttle-assembly-44-9777.html
 +
*[http://www.motionpro.com/motorcycle/tools/featured/revolver/ Motion Pro] Dual Cables.
 +
*[http://www.venhillusa.com/Universal-Cable-Kits-c742/ Cable kits] Ordered kits for clutch and throttle.
 +
*[http://www.youtube.com/watch?v=axGTa0SvXjE Throttle cable how to]
 +
 
 +
====Brakes====
 +
*[http://www.rizoma.com/universal/fluid-tanks/en Rizoma]: Brake fluid reservoir really clean/minimal design.  50-80 euros.
 +
*[http://www.venhillusa.com/Venhill-Custom-Shop/Venhill-Braided-Stainless-Steel-Brake-Line-Custom-Make-Your-Own-Brake-Line-KitOne-Line-with-Stainless-Steel-Fittings-p705.html Another option for stainless braided brake lines.] Check out the "carbon" color.
 +
 
 +
==More Parts==
 +
 
 +
====Brakes====
 +
*[http://www.amazon.com/EBC-Brakes-MD606LS-Brake-Rotor/dp/B006B25PE2 Front brake rotor]
 
====Bars====
 
====Bars====
 
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-parts-satin-black-drag-bars-23-12570-sbpc.html Satin Black Drag Bars in 7/8"] $25.
 
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-parts-satin-black-drag-bars-23-12570-sbpc.html Satin Black Drag Bars in 7/8"] $25.
Line 17: Line 91:
 
*** triple clamp is 20-24cm wide
 
*** triple clamp is 20-24cm wide
 
*** looking for minimal rise. (20-30mm)
 
*** looking for minimal rise. (20-30mm)
−
 
−
====Levers and Perches====
 
−
*[http://www.lowbrowcustoms.com/p776/buy/m-c-parts/wheels-tires-amp-brakes/universal/brakes/lcfabrications-universal-brake-fluid-reservoir-brass-amp-aluminum/ Brass & Aluminum brake reservoir]
 
−
 
−
*[http://www.dimecitycycles.com/vintage-caferacer-cafe-racer-bobber-brat-chopper-custom-motorcycle-brake-parts-black-aluminum-nissin-retro-hydraulic-front-brake-master-cylinder-717-654e.html Nissin Brake lever/master cylinder and brake switch] $189
 
  
 
====Lights====
 
====Lights====
Line 31: Line 100:
 
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-electronic-lighting-parts-mini-black-oval-turn-signals-blinkers-26-6219.html Mini LED Oval Turn Signals - (Black & Clear)] $23
 
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-electronic-lighting-parts-mini-black-oval-turn-signals-blinkers-26-6219.html Mini LED Oval Turn Signals - (Black & Clear)] $23
 
*[http://store.revivalcycles.com/collections/lighting-1/products/x-arc-signals Smooth and clean LED turn signals] $95/pair
 
*[http://store.revivalcycles.com/collections/lighting-1/products/x-arc-signals Smooth and clean LED turn signals] $95/pair
−
 
−
====Switches====
 
−
*[http://www.bikebandit.com/k-s-compact-motorcycle-multi-switch Left side controls]
 
−
** ''1 1/8" Wide''
 
−
**High Beam LED
 
−
 
−
====Throttle Control====
 
−
* Two cables is for PushPull mechanisms.  Some controls can serve either single or PushPull.
 
−
*[http://www.dimecitycycles.com/vintage-caferacer-cafe-racer-bobber-brat-chopper-custom-motorcycle-handlebar-control-parts-biltwell-whiskey-throttle-black-aluminum-single-cable-wt-alu-78-bk.html Black Aluminum Biltwell "Whiskey" Throttle - (7/8", Single Cable)] $95 looks to mtc like the best quality single.
 
−
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-handlebar-parts-chrome-single-cable-aluminum-throttle-assembly-28-0033.html 7/8" Single Cable Throttle Assembly] $16
 
−
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-throttle-parts-black-nylon-throttle-assembly-68-2an.html 7/8" Light-weight Nylon Throttle Assembly and Grips - (Gloss Black)] $13
 
−
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-throttle-parts-oem-style-satin-black-honda-throttle-assembly-44-9777.html
 
−
*[http://www.motionpro.com/motorcycle/tools/featured/revolver/ Motion Pro] Dual Cables.
 
−
 
−
====Brake fluid reservoir====
 
−
*[http://www.rizoma.com/universal/fluid-tanks/en Rizoma]: really clean/minimal design.  50-80 euros.
 
  
 
====Speedometer/Tach====
 
====Speedometer/Tach====
Line 64: Line 117:
 
====Fuel Tank====
 
====Fuel Tank====
 
[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-fuel-tank-parts-flush-mount-aviation-style-fuel-gas-cap-gc1903.html Gas Cap - Aviation Style Chrome]
 
[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-fuel-tank-parts-flush-mount-aviation-style-fuel-gas-cap-gc1903.html Gas Cap - Aviation Style Chrome]
−
 
−
====Controls====
 
−
*[http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-electronic-parts-black-handlebar-mounted-headlight-on-off-starter-switch-12-0203.html Right side "Simple & Clean" On/Off & Starter Switch] $30
 
  
 
====Electrical====
 
====Electrical====
Line 74: Line 124:
 
*[http://www.euromotoelectrics.com/EnDuraSpark-Electronic-Ignition-System-BMW-R-70-95-p/edl-boign.htm Ignition system upgrade]
 
*[http://www.euromotoelectrics.com/EnDuraSpark-Electronic-Ignition-System-BMW-R-70-95-p/edl-boign.htm Ignition system upgrade]
 
*[http://shoraipower.com/products?action=vehicle&type=175&make=7366&model=7405&year=7405 Shorai Li-PO battery type] LFX21L6-BS12
 
*[http://shoraipower.com/products?action=vehicle&type=175&make=7366&model=7405&year=7405 Shorai Li-PO battery type] LFX21L6-BS12
 +
**Length 5.83"
 +
**Width 3.23"
 +
**Height 5.51"
  
−
BATTERIES- LFX21L6-BS12
+
**[http://www.ebay.com/itm/like/331044254031?lpid=82 Ebay] $189.74
−
SHORAI LFX Lithium-Iron Powersports battery, 21Ah PbEq 12V eq, "L" polarity, Case Type 6
+
***[http://www.amazon.com/Shorai-Lithium-Kawasaki-Harley-Davidson-LFX21L6-BS12/dp/B008K5NU18/ref=sr_1_1?s=automotive&ie=UTF8&qid=1385527989&sr=1-1&keywords=lfx21l6-bs12]  Amazon $174.95
−
Length 5.83"
 
−
Width 3.23"
 
−
Height 5.51"
 
−
Sku: 4897034420708
 
−
Part Number: LFX21L6-BS12
 
  
−
**[http://www.ebay.com/itm/like/331044254031?lpid=82 Ebay] $189.74
+
***[http://www.braillebattery.com/index.php/braille/product_accessory/b14115_b14115c_aluminum_mount_kit1 Braille battery mount kit for ML14C, 5.8x3.4x5.75]
  
 
*[http://www.euromotoelectrics.com/category-s/192.htm AGM (Absorbed Glass Matt) batteries] $89
 
*[http://www.euromotoelectrics.com/category-s/192.htm AGM (Absorbed Glass Matt) batteries] $89
Line 99: Line 147:
 
====Nuts and bolts - Stainless====
 
====Nuts and bolts - Stainless====
 
*[http://www.shawstainless.co.uk Stainless nuts and bolts and parts] Full kit 140 pounds sterling
 
*[http://www.shawstainless.co.uk Stainless nuts and bolts and parts] Full kit 140 pounds sterling
 +
*[https://www.motobins.co.uk/index.php Stainless pushrod tubes and axles (rear)]
 +
*[http://www.motorworks.co.uk/vlive/Home/index.php More kit from England]
 +
*[http://www.benchmarkworks.com SS front axel (Sturgis, MS)]
  
 
===Nice Builds===
 
===Nice Builds===

Latest revision as of 13:43, 8 September 2014

Reference Material

Tasks

201408:

  • oil filter (SCP) & 20W50 oil
  • joining compound for cylinder/case interface
  • black silicon for pushrod rubber bits.
  • at the cylinder/head gasket GaskeaCinch
  • ?anything in addition to the valve cover gaskets?

Older:

  • Check w/ Gene at Moto Loco on powder coat pricing breakout
    • Guestimate $600-1K for a big pile.
  • Adrian also suggested Shelby at Santa Barbara Industrial Metal Finishing in Goleta, he'd probably be good for non-frame stuff w/out tight tolerances.
  • Gas tank cleaning and lining North Hollywood - $195 + 50% off second tank (for odd HDavidson tanks).

Machining

  • flatten heads to mate w/ valve covers
  • polish cylinders, heads, valve covers
    • Should the stainless pushrod tubes be installed before or after polish?
  • Pushrods have slight score marks mid-length, some worse than others. Huh?
  • Replace valve seats Here

Replacement Parts

  • head gaskets
  • O-Rings for cylinder head (4 small at bolts and 2 big on cylinder)
  • valve cover seals
  • push-rod tube seals
  • center stand springs
  • rear brake switch
  • oil pressure/neutral sender and wire
  • fork cartridge update.
    • fork seals
  • Wheel bearing seals and wheel bearings


Stainless

  • SS Engine mount bolts
  • SS bolt/nut kit

Related Vids and articles

  • Piston ring compression [1]
  • Pushrod tube seal replacement - Part 1 of 3 (Chris fucking Harris)[2]
  • Useful maintenance tips - R80 [3]

Parts

Controls

Levers and Perches

Switches

Throttle

Brakes

More Parts

Brakes

Bars

Lights

Speedometer/Tach

Fuel Tank

Gas Cap - Aviation Style Chrome

Electrical

Mufflers

SS 18", 1.5" Diameter R65 is 35mm/1.37" and 17.5" long

Tools

Nuts and bolts - Stainless

Nice Builds

Retrieved from "http://wiki-mtc.eri.ucsb.edu/index.php?title=BMW_R65&oldid=839"