Difference between revisions of "Workshop"

From Mtc
Jump to navigationJump to search
 
(One intermediate revision by the same user not shown)
Line 10: Line 10:
 
*Drill Press
 
*Drill Press
  
 +
===Moto-shed: integrate riding gear storage===
 +
**helmets
 +
**gloves
 +
**jackets/pants
 +
**boots
 +
*Pour concrete drive-way.
 +
**Figure out how to minimize elevation change from driveway to workshop and moto-shed but still deal w/ drainage.
 +
===Compressor and compressed air line===
 +
* Mount it on spring isolation mounts/pads
 +
* It's possible to separate the compressor from the tank, possibly put cooling/drain between the two.
 +
* There are automatic drain mechanisms so you don't have to twist the drain valve every time.
 +
*Put compressor "outside" in an insulated "room" of it's own, possibly sunken or partially so.
 +
*Quincy compressors seem to be pretty good. Seth has one, ask him about it.
 +
*[http://www.garagejournal.com/forum/showthread.php?t=141247&highlight=air+plumbing&page=2 Garage Journal post on compressor and lines]
 +
 +
===Welding/plasma station===
 +
===Materials storage===
 +
**Misc wood
 +
**Sheet metal and plywood
 +
**Misc metal
 
===Things to ponder===
 
===Things to ponder===
 
*Storage:
 
*Storage:
Line 32: Line 52:
 
**Elevated cross-members and widely spaced vertical supports at far corners.
 
**Elevated cross-members and widely spaced vertical supports at far corners.
 
**Integrate w/ moto-shed
 
**Integrate w/ moto-shed
−
*Moto-shed: integrate riding gear storage
 
−
**helmets
 
−
**gloves
 
−
**jackets/pants
 
−
**boots
 
−
*Pour concrete drive-way.
 
−
**Figure out how to minimize elevation change from driveway to workshop and moto-shed but still deal w/ drainage.
 
−
*Compressor and compressed air line
 
−
**Put compressor "outside" in an insulated "room" of it's own, possibly sunken or partially so.
 
−
**Quincy compressors seem to be pretty good. Seth has one, ask him about it.
 
−
*Welding/plasma station.
 
−
*Materials storage:
 
−
**Misc wood
 
−
**Sheet metal and plywood
 
−
**Misc metal
 
  
 
===Flooring===
 
===Flooring===

Latest revision as of 09:42, 31 January 2016

Electrical

  • Run tons of it.
  • Any time that you are working with aluminum wire, you must coat all connections with conductive grease such as Ideal brand Noalox. Failure to do so will result in a connection failure due to corrosion, and a hazardous condition which could result in fire or electrical shock.

220

  • Plasma
  • Welder
  • Compressor (outside in soundproof enclosure, possibly sunken or partially sunken?)
  • Lathe
  • Mill
  • Drill Press

Moto-shed: integrate riding gear storage

    • helmets
    • gloves
    • jackets/pants
    • boots
  • Pour concrete drive-way.
    • Figure out how to minimize elevation change from driveway to workshop and moto-shed but still deal w/ drainage.

Compressor and compressed air line

  • Mount it on spring isolation mounts/pads
  • It's possible to separate the compressor from the tank, possibly put cooling/drain between the two.
  • There are automatic drain mechanisms so you don't have to twist the drain valve every time.
  • Put compressor "outside" in an insulated "room" of it's own, possibly sunken or partially so.
  • Quincy compressors seem to be pretty good. Seth has one, ask him about it.
  • Garage Journal post on compressor and lines

Welding/plasma station

Materials storage

    • Misc wood
    • Sheet metal and plywood
    • Misc metal

Things to ponder

  • Storage:
    • maybe redo loft for better access and long stock storage out access doors into driveway/carport area
    • Upper cabinets rimming shop up to ceiling w/ LED spot/task lighting underneath.
  • Lighting
    • LED
    • Have some portable task lights w/ magnifiers etc.
    • Work ambient lighting from outside.
  • Heated floor
    • Probably electric w/ concrete/self-leveler over it, possibly stain
  • Beer fridge, maybe "outside" or sunken somehow w/ tap(s) in convenient location.
  • Sink, probably outside.
  • Hidden moto-lift in center?
  • Baldor Grinder
  • Sand blaster.
  • Computer station
  • Double hinged barn doors w/ "lights".
    • Want to be able to use as a regular "door" as well, seems reasonable.
    • Double hinged will allow opening w/ tighter clearance in front.
  • Would like to extend roof out front for added covered working area
    • Elevated cross-members and widely spaced vertical supports at far corners.
    • Integrate w/ moto-shed

Flooring

Anti Fatigue Mats

Misc

Tools

Retrieved from "http://wiki-mtc.eri.ucsb.edu/index.php?title=Workshop&oldid=987"